The last couple of days, I’ve been trying to connect my laptop charger to the socket at the left side of my laptop, but something must be incorrect with it as it won’t detect it.
I usually have to fiddle around with it and bend and hold it in certain positions for the laptop to detect it and start charging, and it sometimes means I have to hold it there while waiting for it to charge or place something next to it to prop it up.
I don’t reflect it is anything to do with the charger itself, or the battery as I have a emergency charger and the same the same problem happens with it. The battery charges perfectly.. when held in the right position.
I don’t really know what to do to fix it as replacing the battery/charger won’t make a difference.
The model is HP Pavilion zd7000.
Help much appreciated
Best answer:
Answer by Dr. HOUSE
It sounds like the laptop jack itself has a broken connect joint.
Add your own answer in the comments!







![Norton SystemWorks 2005 Premier - Single User [AntiVirus, Utilities, GoBack, Ghost, CheckIT]](http://ecx.images-amazon.com/images/I/5128AM05VKL._SL160_.jpg)


well you laptop charger seems like a piece of crap get a new one
u should probably take it to a computer place and tell them that its the computer not the charger, they probably have the right tools to take it apart, look inside, and find the problem.
Common Battery Issues
The following are the most common issues occurs with Batteries:
1. Battery not charging by the book.
2. Battery hold time less.
Cause:
Both the above issues may possibly occur due to battery out of order or failure.
Solution:
To resolve these issues, perform the following troubleshooting steps:
Step 1:
Try Power Drain Steps.
Here are the steps to perform a Power Drain Procedure:
1. Disconnect the AC Adapter.
2. Remove the Battery.
3. Hold the Power button down for 30 seconds to 1 minute.
4. Reconnect the AC adapter; do not connect the battery now.
5. Turn on the Notebook power.
Step 2:
Provide the Battery Calibration steps.
Note : Refer ABC for steps.
Step 3:
Update BIOS.
Step 4:
Run a Battery Health Check from the following HP Website:
http://h20239.www2.hp.com/techcenter/battery/index.htm
************************************************************************************
BATTERY USAGE TIPS
Extend notebook battery life:
1) Running out of battery power in the midst of a crucial machinate is a common dread among mobile computer users. If you’ve ever had to rush off in search of an outlet so you may possibly end an vital presentation, you’ll appreciate knowing how to get the most out of your notebook battery.
Reduce the speed of your processor. The quicker your computer works, the more quickly it uses up the supply of power. By cutting down on processor speed, you can extend the charge of your battery. Methods to reduce processor speed vary from model to model, and your manual should provide instructions for doing so.
2) Batteries for laptops come in three main types: nickel cadmium (NiCad), nickel metal hydride (NiMH), and lithium ion. Each of these batteries is rechargeable with an AC adaptor. In most cases, it will give you between two and four hours of computer use, depending on a number of factors. Here’s what you can do to extend your battery’s life.
3) Keep track of how much power is left in your battery to avoid unexpected disasters. Many notebooks have an external gauge that will show the battery’s charge even when the computer is not turned on. Additionally moving your mouse over the battery-shaped icon in your Task Bar will show you the percentage of battery power still available.
4) Reduce the brightness of the screen to the minimum readable level. Many notebook models have keyboard buttons that allow you to do this easily, or you can use the slider in the Show Control Panel.
5) Place your computer to sleep whenever you are not actively by it. Most notebooks come with built-in, automatic sleep features, but you should get into the habit of doing it manually whenever you step away. Sleep mode, sometimes called “Suspend,” shuts off monitor, hard disk, and processor, while preserving everything in RAM. When you return and activate your computer, usually with a mouse or keyboard movement, you can resume working just where you left off.
6) Sleep mode saves energy, but it will eventually run down your battery if you leave your computer indefinitely in this condition. Worse, you risk losing everything saved in RAM if your battery dies. If you plot on being away from your computer for more than an hour, try the “Suspend to Disk” or “Hibernate” mode. These save the contents of RAM to your hard disk before end down. While slower to activate, these save more power than sleep mode and eliminate the risk of losing any vital data.
7) Remove peripherals when not in use. External hard drives, CD-ROMs, Zip drives, modems, and other peripheral devices can draw power from your battery even when they are not in active use. Disconnect them when you have finished by them.
9)Deplete the charge on your battery completely before recharging. While reminiscence effects in modern batteries are much reduced from what they were a few years ago, you will still suffer a loss in the charge a battery will hold if it is not completely drained first, resulting in a shorter battery life.
Consider buying an superfluous battery. This way you can charge one while the other is in use, and be confident of never running out of power at a critical moment. Some notebooks, including models in the HP Omnibook and Compaq Presario lines, have an alkaline battery pack available, which provide superfluous security for times when no power outlet is available.
When you get a new battery, or if you’re by a battery that’s been idle for a few months, charge and drain it three times. This fully activates the battery chemicals that may have become bone idle after a long rest.
Excellent Luck and Pleased Processing………..
It sounds like the problem is the socket, not your charger. Loose or shorted wiring will cause problems like what you have described. You can try by a different socket, or have someone fix that one.
When you have to bend it or hold it in the right position it usually means it’s not getting the right contact it needs to complete the circuit for the power to flow. This may possibly mean the computer power socket is hurt or charger plug is hurt. Thus, there are really 2 options at this top:
1) Replace the Charger so the plug can be replaced or 2) replace the laptop.
You may possibly take it to your local computer shop and see if they can provide you with a charger to check. If they replace the charger and the computer doesn’t recognize the power then you pretty much have your answer on what you need to do next. Just be sure to backup all your data before replacing the unit.
the prongs may be bent on the computer. If they are dont try to fix it your self it force break off take it to a computer store and they have special tools to fix it
back up your work!!! I had this problem with my Gateway and unseen it and eventually the board burned out! and I lost all my data!. Now I am looking to replace with a Mac….Take it in and see if they can save it..
HP Pavilion zd7000
http://h10025.www1.hp.com/ewfrf/wc/product?product=3223624&cc=us&dlc=
manuals
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&cc=us&dlc=&product=3223624&
adapter
http://www.shopping.com/xPF-Household-AC-Adapter-for-Compaq?convertedToHyphens=right
if socket it self is lose internally, may need to repair,
may be try adding additional room cord, to go from power to laptop, check electronics stores,
http://img234.imageshack.us/img234/7015/extendcord0rv.jpg
..