Best answer:

Answer by Mark
Email the company and ask if they would be willing to sell their old rack for a discount.

Give your answer to this question below!

Best answer:

Answer by mr. c
this simply means the server is trying to boot from its Ethernet (Internet cable) connection

start up the server & when the Power-On Self Test is nearly over press the F12 key to access the boot menu
(the screen should display that option around that time in the top right corner)

once in the boot-menu, use the arrow keys to select CD (DVD?) Rom and hit enter to boot from that

as an extra step, you may want to press F2 first & boot into the BIOS menu
there you can check (in the boot sub-menu) whether the boot order is something like
- primary hard disk
- CD-Rom

most likely, currently, the Ethernet card is 1st; hit the – key on the num pad to move it down

once those changes are done, hit the ESC key & choose “Save and reboot” and hit F12 when the server restarts

Know better? Leave your own answer in the comments!

Best answer:

Answer by no1home2day
It depends on which server you are now currently using. There is insufficient information to provide an adequate answer.

Give your answer to this question below!

I live in Perth, does this mean that hosting would give bad ping to people who hire a server from America/other countries?

Thanks for any info!

Best answer:

Answer by Tony
I would not recommend it simply because it will be hard to compete with the thousands other servers, with one exception, if you have friends and family or able to get connection to convince people to move to yours, you will make some good profit.

Know better? Leave your own answer in the comments!

http://www.ebay.com/itm/DELL-POWEREDGE-1950-2X-XEON-5150-DUAL-CORE-CPUS-4GB-MEM-1x-73GB-10K-SAS-HDD-/200709044139?pt=COMP_EN_Servers&hash=item2ebb30f7ab

Best answer:

Answer by Nolly
That is an entry level rack server that should be able to be used rackless.

However, you need to be careful because rack servers are designed for the cooling to be most efficient on a rack. You probably want to put a little pedestal at each corner so it is up off the ground and air can flow underneath. If it is near the floor, you will also want to check it for dust a spray it out with canned air every couple of weeks. Also if you live in a hot climate you will want to watch the temperatures of the system and point a house fan at it if it gets too hot.

Be warned most servers are significantly louder than what you are used to in a desktop computer. Just saying in case you are buying this for your home and were thinking about putting it in a bedroom or something.

What do you think? Answer below!

Best answer:

Answer by johntrottier
The bottleneck is most likely at a router outside of your control. The only way you can achieve the rates you are looking for is to ease dedicated lines and control the entire transmission path. As long as you try to use the Internet as your path, you are at the mercy of the slowest connection in the system

Sorry

Give your answer to this question below!

Log onto incoming mail server (POP3): Your e-mail server rejected your user name.  Verify your user name for this account in Account Settings.  The server responded: -ERR Command is not valid in this state.

After you change your Pop settings your users will now be able to authenticate over TCP110.

Check it out:Clint Boessen’s Blog

Hub Transport Role
Failed

Error:
The following error was generated when “$error.Clear();
Add-DelegatedGroupsToLocalAdminGroup -DomainController

$RoleDomainController

” was run: “Failed to read directory object with distinguished name TST-DC2-EXC-1-4.”.

Failed to read directory object with distinguished name TST-DC2-EXC-1-4.

After looking at the error “Failed to read directory object with distinguished name” I first checked the SPN for the computer object TST-DC2-EXC-1-4. This checked out fine.

I then removed the computer TST-DC2-EXC-1-4 from the Active Directory domain, deleted the computer object then rejoined it. When rejoining the domain I experienced the following error:

Changing the Primary Domain DNS name of this computer to “” failed. The name will retain “tsthosting.local”. The error was:

This specified server cannot perform the requested operation.

I removed the PC from the domain setting it back to workgroup. Before joining it to the domain again I manually set the primary DNS suffix for the computer account by clicking More in the domain settings window.

I then unticked change primary DNS suffix when domain membership changes and manually typed in my domains DNS suffix.

This resolved my problem allowing my setup to complete successfully.

While this procedure fixed the issue, it is not the root cause. I did not have enough time to diagnose and determine the root cause.

Check it out:Clint Boessen’s Blog

Answer by coolevil
A dedicated server is a single computer in a network reserved for serving the needs of the network..Linux and Windows are two different types of operating systems. Linux is the most popular operating system for web servers. Since Linux-based hosting is more popular, it has more of the features web designers expect. So unless you have websites which need specific Windows applications, Linux is the preferred choice

What do you think? Answer below!

Best answer:

Answer by Daniel
you could probably just build your own for that amount, and I would also look into using linux as an os, you could go with the user friendly ubuntu

Give your answer to this question below!